Featured
How To Change String On Toro Weedeater
How To Change String On Toro Weedeater. How to remove a toro trimmer cutting head. Lift the spring spool off the cutter shaft.

Insert the string from step 3 into the hole. The cap and the spool. Pull the cap and the spool below it straight.
Feed The New Line Through The Eyelet And Into The Spool Until It Protrudes Through The Second Eyelet.
When wrapping line across the spool, ensure that you always wrap in a. This was my first time in a long time changing the string on a trimmer. Lift the spring spool off the cutter shaft.
Finding The Hole Is The Initial Stage In Stringing.
Grasp the bottom of the trimmer head safety guard with one hand. Pull the cap and the spool below it straight. 1.41 replace driver all units except 1978 cordless (fig.
Put The Finishing Touches On Your Yard In One Charge With Toro's 24V Cordless String Trimmer/Edger.
Hold your spool in such a way that the retainer side of the spool lines up to the exact slot of your cap head. Check the battery charge indicator lights to ensure that the battery has enough charge, if the lights are below the indicated level, charge the battery. Use only 2 mm (0.080 inch).
6.3 Replace Motor Parts Catalog Toro Trimmer 900 Handle Assembly Parts Toro.
How to trim and edge using a toro 24v cordless string trimmer. Check if you need.8″ or.6″ line. Then, neatly wrap the string around the spool in the direction.
Feed The New Line Through The Eyelet And Into The Spool Until It Protrudes Through The Second Eyelet.
The trimmer head on a toro weed trimmer consists of two basic parts: Holding the base of the trimmer will keep the cap from spinning on the shaft when you try to remove it. Visit www.toro.com for product safety and operation training materials, accessory information, help finding a dealer, or to register your product.
Comments
Post a Comment